Actualización de la integración de la celda de manufactura flexible FMC de la facultad de ingeniería mecánica
Actualización de la integración de la celda de manufactura flexible FMC de la facultad de ingeniería mecánica
Autores
Director
Montilla Montaña, Carlos Alberto
Autor corporativo
Recolector de datos
Otros/Desconocido
Director audiovisual
Editor/Compilador
Editores
Universidad Tecnológica de Pereira
Tipo de Material
Fecha
2021
Cita bibliográfica
Título de serie/ reporte/ volumen/ colección
Es Parte de
Resumen
Este proyecto busca realizar una actualización de un trabajo que ya había sido desarrollado con anterioridad como trabajo de grado de la Maestría de sistemas automáticos de producción de la Universidad Tecnológica de Pereira; el proyecto previo permitió realizar la integración de diferentes equipos y elementos disponibles en el laboratorio de manufactura de la facultad de Ingeniería Mecánica, y que no estaban interconectados ni controlados como una celda de manufactura.
El presente trabajo tomó como base los resultados obtenidos de la integración previa del robot, torno, una maquina simulada, un sistema de visión, una banda transportadora a la celda y de las propuestas de mejoras definidas en aquel proyecto, para realizar la inclusión de una fresadora didáctica (en lugar de la maquina simulada), y una base deslizante (que reemplaza la banda transportadora); y atendió los requerimientos que implica hacer una nueva distribución de la celda, las reprogramaciones de los anteriores y los nuevos equipos, la actualización del programa monitor, entre otros aspectos…
This project seeks to carry out an update of a work that had already been developed previously as a degree work for the Master's degree in automatic production systems at the Technological University of Pereira; the previous project allowed the integration of different equipment and elements available in the manufacturing laboratory of the Faculty of Mechanical Engineering, and that were not interconnected or controlled as a manufacturing cell. The present work was based on the results obtained from the previous integration of the robot, lathe, a simulated machine, a vision system, a conveyor belt to the cell and the improvement proposals defined in that project, to carry out the inclusion of a didactic milling machine (instead of the simulated machine), and a sliding base (which replaces the conveyor belt); and met the requirements involved in making a new distribution of the cell, the reprogramming of the previous and the new equipment, the updating of the monitor program, among other aspects...
This project seeks to carry out an update of a work that had already been developed previously as a degree work for the Master's degree in automatic production systems at the Technological University of Pereira; the previous project allowed the integration of different equipment and elements available in the manufacturing laboratory of the Faculty of Mechanical Engineering, and that were not interconnected or controlled as a manufacturing cell. The present work was based on the results obtained from the previous integration of the robot, lathe, a simulated machine, a vision system, a conveyor belt to the cell and the improvement proposals defined in that project, to carry out the inclusion of a didactic milling machine (instead of the simulated machine), and a sliding base (which replaces the conveyor belt); and met the requirements involved in making a new distribution of the cell, the reprogramming of the previous and the new equipment, the updating of the monitor program, among other aspects...